Create tire clearance without a tall Defender HD8 lift
SuperATV's BFT kit combines a 2-inch lift with 2-inch forward-offset front A-arms for the listed Can-Am Defender HD8 models. High-clearance bends add 1.5 inches of clearance beneath the arms, with the supplier listing support for tires up to 34 inches.
Kit contents and configuration
- Upper and lower front A-arms
- Steering stop kit
- 17-inch limit straps; not needed with Rhino 2.0 axles
- Spring spacers and shock brackets
- Shock bump stop; required for 34-inch tires
The 1-1/4-inch DOM steel arms have adjustable camber, factory-length preset pivot blocks and reinforced shock mounts. Choose the ball-joint configuration shown in the options; OEM or aftermarket ball joints can be used. SuperATV lists lifetime coverage for the lift kit, subject to its manufacturer warranty terms.
Before you order
Tire clearance depends on the complete setup. The included shock bump stop is required for 34-inch tires, and the 17-inch limit straps are not needed when running Rhino 2.0 axles.
Specifications and features
- Fit 34” tires with minimal lift
- 2” forward offset A-arms
- 2” of lift
- High-clearance—1.5” of additional clearance
- Made with 1-1/4” diameter DOM steel tubing
- Full camber adjustability
- Pivot blocks pre-adjusted to factory length
- Reinforced shock mounts
- Includes all 4 front A-arms
- Can be used with OEM or aftermarket ball joints
- UV-Resistant powder coat finish
- SuperATV lists a lifetime manufacturer warranty; manufacturer terms apply.
Fitment information
- Can-Am Defender HD 8 : 2016-2021
- Can-Am Defender HD 8 DPS : 2016-2021
- Can-Am Defender HD 8 XT : 2016-2021
- Can-Am Defender HD 8 XTP : 2018-2021
- Can-Am Defender MAX HD 8 : 2017-2021
- Can-Am Defender MAX HD 8 DPS : 2017-2021
- Can-Am Defender MAX HD 8 XT : 2017-2021
